Hey guys, Im back

[AMD Man]

Well been gone awhile, tryin to redo my whole set-up, Still in the process, but I've got some prelim results:D And they are nice!!!!

New Board=Asus A7V333
New Cpu="Unlocked"XP2000+
New Radiator=Black Ice Extreme
New Pump=ViaAqua 1300 1380L/ph
New Block=DangerDen 2
New Pelter=156w

Well all is going well soo far, but my psu is maxed out I think, Its a 400w antec. Water temps are pretty high, because at idle I am at 16c.. But I have this 2000+ runnin at 2012mhz :D 11.5*175 and this is at 1.85v!!!!! I am pretty sure that it will easily do 2100 if I could cool it better!!! Sooo this is what I have ordered:cool: A New waterblock the dangerden 3 and a 225w pelter and a new 510w Antec Psu:) and a another 120mm fan for my radiator.. I have also ordered some more ram as 177 is the max my pc2100 will go with 2.8v so I have some Corsair pc2700 on its way:D I will let all know how I do later this week:)

[AMD Man]

Oh and I still have to do a fresh install of windows.. did'nt do one yet so all of this is running off of my kt266a chipset install...;)

[dicki]

sweet overclock mate :)

how much more voltage can you squeeze out of that asus? and have you considered a dedicated psu for the pelt? i mention this because your 15v peltier is running off just 12v so your loosing 20% of your cooling power straight away before you even think about losses in the system

dicki

[lechumbl]

Hi Hack,

Were ya gone??
Just kidding!!
Sounds good!!

Take care........

[AMD Man]

Heck, you know me, Im never really gone;) oh and I can get up to about 2.25v core voltage...

I dont really want to run a independent psu for the pelter because I cant get the psu in the 2nd psu in the case, thats why I got the 510w psu.. We'll see what happens, I am hopeing to get to 180-200fsb with my new ram, so I need to figure out how to do a vdimm mod....But if my 510w psu and 225w pelter does not cool my cpu down to 0c then I may go ahead and use a 2nd psu..

[AMD Man]

Oh and this Cpu is a Retail AGOIA 0206 chip, as this is the best o/c I have ever had over core speed... Figures it would be with a retail cpu and not an OEM cpu... Every cpu I have had up till now have been an OEM and I could o/c them just over 200mhz over core speed, but this retail cpu is sweet, and its a Brownie not a greenie, my last two 2000+ were OEMS, have been greenies!!!! This brown one is doing alot better!! "note to self! Only buy retails for now on":)

[NorthernYankee]

Are you having any condensation yet?

--NY

[AMD Man]

Well I have it waterproofed pretty good, but the coldplate is getting pretty cold, I can feel the foam getting cold:) I plan on redoing the insulsting job when I get the new waterblock, as there was a spot on the coldplate that I could see ice forming, so I applied more silicone:D

[EMC2]

If the Corsair PC2700 you get is the newer kind of theirs that is based on the Samsung memory chips, you won't need much Vmem, they like in the 2.85 to 3V range (actually get worse above 3V for most people) ;)

As far as the pelt issue - they work best when they are at 65 to 75% of their max voltage, so 12V is just about right for the 16Vers :) Oh, and don't forget to waterproof the back of your m/b if you start getting the temps down too far... conduction through the socket pins will cool down the m/b area around the socket ;)

[AMD Man]

Yeah I do have the back of my mobo waterproofed with silicone and neoprene:)

[Jetrunner]

i wish i was as smart as you guys lol....:rolleyes: some day................maybe. :)

[AMD Man]

Originally posted by Jetrunner
i wish i was as smart as you guys lol....:rolleyes: some day................maybe. :)

Maybe jet, someday;)