softfsb pll files

[dicki]

hullo lads,

anyone got a pll description file for an ics 9248cf 199 pll?

it's for an ecs k7s5a board

if no ones got it then i guess i'll have to do some hacking and see if i can write one myself :xmad:

[MrP]

Dicki,

i assume your truing to get softFSB to work with that board

CPU cool supports the following ICS PLL's

ICS

9148B-04 9148-08 9148-17 9148-26 9148-32 9148-36 9148-37 9148-46 9148-47 9148-53 9148-58 9148-60 9148-82 9148-93 9148-111

9150-04 9150-08

9248-39 9248-64 9248-72 9248-73 9248-78 9248-80 9248-81 9248-87 9248-90 9248-96 9248-97 9248- 98 9248-99 9248-101 9248-102 9248-103 9248-105 9248-110 9248-112 9248-114 9248-121 9248-122 9248-126 9248-127 9248-128 9248-131 9248-134 9248-135 9248-136 9248-138 9248-141 9248-142 9248-151 9248-162 9248-163 9248-168

9250-08 9250-10 9250-13 9250-14 9250-16 9250-18 9250-19 9250-23 9250-25 9250-26 9250-30

94201 94203 94215

so i would assume thatoe of those will work with your board.

get the software here http://www.podien.de

toodles :xsofa:

[Dewill]

Its what I'am running my ECS K7S5A,s with.
146MHZ is the sweet spot for my XP1700's
seti wu's in sub 3 1/2 hourswith 3 1/4 being the ave.
Have fun:p
Regards
Jed;)

[Dewill]

Have a look on ocworkbench forum's sometime
loads of stuff about the K7S5A
Crazydude gave me the link www.ocworkbench.com
Regards
Jed;)

[dicki]

so which file do you use dewill? my version of softfsb doesn't have settings for either the ecs or the 9248-199 pll

dicki

[Dewill]

Hi dicki
I don't use softfsb, its cpucool.
I found cpucool on the ocworkbench site.
Also another one called CHFSB it works from dos
Its worth a look.
Regards
Jed;)

[dicki]

ah ha! just found it...

my computer crashed straight away :( only pushed it up 3 mhz :( damn this is going to be a hard overclock

dicki

[Dewill]

That don't sound to good,
What are you running ?
I now have 3 of em running 2 with xp1700's and 1 with a 1400
all 3 will run at the 146mhz setting even with the memory maxxed out.
They all crash at 150mhz:( seems you need to make a couple of mods to get any higher.
Regards
Jed;)

[dicki]

it's a very low spec system... it's just to tide me over till i here about a possible new job in april (yes i know thats months away)

duron 850
ecs k7s5a mobo
2* 64mb sticks of very cheap pc133
geforce mx

it's feeling very slow compared to my old duron @ 1100 so i had to try to clock it. so what mods are availible? i think i'm going to have to go for very standerd bios settings and see what happens

dicki

[NorthernYankee]

Well it may be the RAM holding you back.

--NY

[SMOKE_SKULL]

I also am using CPUFSB on my K7S5A mobo with a 1400T-bird and it will run at 147FSB but it will crash after a halfhour or so or Q3A Excessive. 143 works great with no trobles at all.

[dicki]

well i backed off all bios tweaks, took the memory down from 133 ->100 mhz and tried again.

still no luck. it won't clock at all... it just hangs instantly, i tried underclocking just to prove the program works and it's fine, managed to get down to a rocking 566 mhz :D

this computer was never designed with clocking in mind so i think i'm going to have to give up on it :( ahh well

dicki

[Jonathan]

I love my k7s5a's I can get 150 fsb settings out of my 1.3 tbird and my xp1800+ I would recomend the overclocking bois found at http://forum.ocworkbench.com/ocwbcgi/ultimatebb.cgi?ubb=forum&f=27 . But I was using pc2100. I hope to get some pc-3000 next month. I want to see 166/166 :devil: Check out this thread at ocworkbench 193 fsb out of a k7s5a :xbounfl: http://forum.ocworkbench.com/ocwbcgi/ultimatebb.cgi?ubb=get_topic&f=27&t=001272

[dicki]

thats some really good info there jon, that went straight in my book marks, cheers!

dicki