PDA

View Full Version : Traded in kr7a for 8kha+

Dr. GoodenHigh
6th January 2002, 04:48 PM
And I'm glad I did. I had to RMA 3 (yes 3) boards, 2 were un modded and simply died from setting fsb to 180???
Too sensitive for my likes.
This 8kha+ is a ROCK! The 12-18-01 bios is very stable, Havent had so much as a hiccup with it.
look at the bandwidth goodness...
http://community.webshots.com/storage/1/v0/9/16/10/28491610UDLZhvQSeT_ph.jpg
no problem running 3dmark at this speed too :)
JMke
6th January 2002, 08:05 PM
Originally posted by Dr. GoodenHigh
This 8kha+ is a ROCK!

well "my" rock crumbled this weekend, no mods, @ 165fsb the epox failed to boot, and gave C1 error msg (diagnostic leds) and that was the end of it.. tried different ram to no avail :(
Dr. GoodenHigh
6th January 2002, 08:09 PM
Well thats the sh*ts.....
I retract my previous statement that the kr7a was the best mobo I've owned, This epox has taken over!!
Originally posted by JMke


well "my" rock crumbled this weekend, no mods, @ 165fsb the epox failed to boot, and gave C1 error msg (diagnostic leds) and that was the end of it.. tried different ram to no avail :(
JMke
6th January 2002, 08:17 PM
Gibbo's mem timings ;)

http://homepage.ntlworld.com/r.gibbson/newram.jpg

guess where the FSB is @ :)
Dr. GoodenHigh
6th January 2002, 08:36 PM
sweet.
are there some tweaks I'm missing or is he up at 200+ fsb?
I honestly dont know that my hd's or mem for that matter could handle that.Originally posted by JMke
Gibbo's mem timings ;)


guess where the FSB is @ :)
JMke
6th January 2002, 08:38 PM
he hit 200FSB ;)
with his XP1500+ @ 1900Mhz

http://www.icronticforums.com/showthread.php?threadid=19118
BLOOD
9th January 2002, 10:30 PM
hey, doctor
what raid card you running with your drives?

good scores also damn im thinking of getting one
as i have 700mb of 2100 ddr just sitting here begging
to be used :)
Dr. GoodenHigh
10th January 2002, 10:55 PM
none yet, my epox raid card was supposed to be here today but forgot to leave note on the door(while at work)
it was 23$ for a dual channel udma100 raid card at axion
Originally posted by BLOOD
hey, doctor
what raid card you running with your drives?

good scores also damn im thinking of getting one
as i have 700mb of 2100 ddr just sitting here begging
to be used :)
Silversaver
10th January 2002, 11:40 PM
Hi,

Maybe he can run at 200FSB, but I am sure he can't uses UDMA for his HDs...
Dr. GoodenHigh
11th January 2002, 01:06 AM
I dont know about him...but...
I can run 189fsb with ultra dma ata100 just fine.
sorry if this upsets you :(

Originally posted by Silversaver
Hi,

Maybe he can run at 200FSB, but I am sure he can't uses UDMA for his HDs...